Planet IPoE-E172 Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender

Discontinued Replaced by IPOE-E302

Planet IPoE-E172 Features

Physical Port

• 3 10/100/1000BASE-T Gigabit RJ45 interfaces
• - 1-port data + power input
• - 2-port data + power output

Power over Ethernet

• 1-port data + power input
• - Complies with IEEE 802.3bt/at Power over Ethernet end-span/mid-span PD
• - Supports PoE input power up to 95 watts
• 2-port data + power output
• - Complies with IEEE 802.3af/802.3at/802.3bt Power over Ethernet/end-span + mid-span PSE
• - Up to 1 IEEE 802.3bt device powered
• - Up to 2 IEEE 802.3af/802.3at devices powered
• - Supports total PoE budget up to 60 watts for 2 PoE output ports- Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 2K absolute MAC addresses
• 9K jumbo frame support in 1000Mbps duplex mode
• Automatic address learning and address aging
• Supports CSMA/CD protocol

Industrial Case and Installation

• IP63-rated aluminum case
• Wall-mount design
• Waterproof and dustproof
• Supports 2000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• No external power cable required for installation
• Plug and Play installation